12g Co2 Filling Charger Adaptor with 0-200/800 PSI Regulator

TYPE 5 = 800PSI Version. 

Other versions only go up to 200psi
 

Product Description

Co2 Adapter Setup,12g Co2 Capsule quick change to Quick Filling Charger with 0-200/800 PSI Regulator.

DIY Co2 setup for Air accessories BB filling.
Package include:According to your choice.
1× 12g co2 cartridge quick change adaper.
1× 0~200psi regulator.
1× regulator oulet adapter with 8mm female quick disconnect or Magazine charging nozzle.

Please Note:

1- Since this kind of regulator cannot produce constant pressure, it takes time to adjust the pressure. If Fully automatic firing, the air pressure will be unstable and The pressure gauge will back pressure and beating but it will not affect the single shot or wait for 1 second to fire again.

2 - it need to put 12g disposable co2 capsule in quick Change when you refilling

How it works:
In order to prevent the gauge from blowing up during installation,please follow the instructions:
1、Turn the knob counterclockwise until the adjusting lever is completely relaxed before getting through the gas, so that the regulator is closed.
2、Then screw the regulator to the HPA bottle.
3、After installation, you can tighten the knob in clockwise direction, so that you can adjust the pressure you need.But please keep the pressure below 300psi, otherwise the pressure gauge will break.

Type1

Type2